Conductive-On-Graphic
Conductive-on-graphic technology allows for conductive shorting pads to be printed on the subsurface side of a graphic overlay, eliminating the need for the top circuit layer and an adhesive layer.
Non-Tactile Construction
Tactile Construction
Physical Characteristics
|
2 million minimum non-tactile
1 million minimum tactile (Poly Dome) |
|
2 to 6 oz. typical non-tactile
10 to 18 oz. typical tactile |
|
.028" typical non-tactile
.026" typical tactile |
Environmental Characteristics
|
-40 to +65 standard
-40 to +85 available |
|
no effect after 100 cycles from -40 to +65°C |
|
no effect after exposure to 95% RH at 40°C
for 504 hours (non-tactile) |
Electrical Characteristics
- Contact Resistance: 100 ohms maximum typical
- Open Circuit Resistance: 5 x 106 ohms minimum
- Contact Rating: 30 VDC maximum, 100 mA maximum, 1 watt maximum
- Contact Bounce: 10 ms maximum
- Contact Material: Silver to silver
<Back | Top | Home
|
